LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Hobbies & Garden Measuring Instruments Protractors Digital Inclinometer and Spirit Level with Laser Line and Accuracy of 0.2° with a Range of 4 x 90° and USB-C Charging in Silver Finish
Digital Inclinometer and Spirit Level with Laser Line and Accuracy of 0.2° with a Range of 4 x 90° and USB-C Charging in Silver Finish

Digital Inclinometer and Spirit Level with Laser Line and Accuracy of 0.2° with a Range of 4 x 90° and USB-C Charging in Silver Finish

The laser extends the edge of the tool across the entire room, and the display shows the slope to the nearest tenth of a degree. Readings can be taken from the front and the top, and it charges via USB-C cable. Full description
In stock
€58.47
Safe shopping Safe shopping
Overview
Digital Inclinometer and Spirit Level with Laser Line and Accuracy of 0.2° with a Range of 4 x 90° and USB-C Charging in Silver Finish

The elongated body resembles a short spirit level, but instead of a bubble, it features a digital display that reads the slope to the nearest tenth of a degree without estimating between the markings. The claimed accuracy is ±0.2° on one axis and the measurement range covers 4 x 90°, allowing the device to handle any position around the entire circumference. A red laser line projects from the front, aligning with the device's axis and projecting further onto walls, floors, ceilings, and workpieces. The value is displayed on the front screen as well as on a smaller screen at the top edge, making it visible from above when the device is lying on a board or on the edge of a profile. Charging is facilitated by a USB-C connector, so the inclinometer can be charged with the same cable as a phone, eliminating the need to purchase disposable batteries.

  • Laser line in the device's axis – the beam extends the edge of the tool by several metres, allowing the slope to be transferred to the opposite wall or to mark lines for mounting shelves and cabinets.
  • Accuracy of ±0.2° on one axis – the stated deviation corresponds to the installation of shelves, machine adjustments, and checking the slope of structures during construction work.
  • Range of 4 x 90° – measurement covers the entire circumference across four quadrants, allowing the device to be placed flat, upright, sideways, or upside down.
  • Display on both front and top sides – the value is shown from two sides, so it can be read from the front and above without rotating the entire body.
  • Reading to the nearest tenth of a degree – the display operates with one decimal place, which is sufficient for adjusting slopes, checking drainage, and comparing two surfaces against each other.
  • Elongated shape with a flat base – the longer contact surface fits better against the edge of a board or profile than a short box and better accommodates unevenness over a longer stretch.
  • Two-button operation – the large circular buttons on the front panel can be pressed even while wearing gloves, and the layout remains clear without a manual.
  • Charging via USB-C – the built-in battery charges with a standard cable, making the device ready for use even outside the workshop without the hassle of searching for batteries.
  • Battery status indicator – the symbol on the display monitors the remaining capacity, allowing charging to be planned before extended work, rather than in the middle of measuring.

Contents of the package:

  • 1x digital inclinometer

The inclinometer with laser is suitable for installing kitchen units, shelves, and pictures, for building partitions, for adjusting machines, and for checking the slope of floors. Before measuring, it is advisable to place the device on a flat surface and calibrate to zero, as this affects the accuracy of all subsequent values. When projecting a line over a longer distance, it helps to rest the device on a stable surface to prevent the beam from shaking and to keep the line sharp. Lasers should not be directed into the eyes, so the device should be positioned so that the beam points at the work surface and not into areas where people are moving. After use, simply wipe the body clean of dust, recharge the battery, and store the tool in a way that does not apply pressure to the laser optics from other tools.

Price incl. VAT €58.47