LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Auto & Moto Car Electronics Parking Sensors Car Parking Sensors 4 Probes LED Display with Backlighting Parking Assistant 12 V Sensors 22 mm Sound Alert
Car Parking Sensors 4 Probes LED Display with Backlighting Parking Assistant 12 V Sensors 22 mm Sound Alert

Car Parking Sensors 4 Probes LED Display with Backlighting Parking Assistant 12 V Sensors 22 mm Sound Alert

Set of parking sensors with 4 probes and LED display with coloured backlighting. Measures 0.3–2 m, shows distance and warns with sound. Drill 22 mm included. Full description
In stock
Colour:
€49.30
Safe shopping Safe shopping
Overview
Car Parking Sensors 4 Probes LED Display with Backlighting Parking Assistant 12 V Sensors 22 mm Sound Alert

The set of parking sensors with 4 ultrasonic probes serves as a parking assistant for the rear bumper of a passenger car. The sensors measure the distance from an obstacle in the range of 0.3–2.0 m and the result is displayed on the LED screen with a numerical value in metres. The coloured backlighting of the display changes according to the distance, and the built-in buzzer alerts the driver with sound. The entire set is designed for a board voltage of 12 V and includes a control unit, wiring, and a hole saw for installation. When reversing, you have an overview of obstacles that are not visible from the driver's seat.

  • LED Display — the monitor shows the distance from the obstacle numerically, for example, 1.5 m or 0.3 m. Side strips light up blue, orange, or red depending on how close the obstacle is. The data on the display continuously changes while reversing, so you can immediately see how much space is left behind the vehicle.
  • Collision Warning — at very short distances, a P symbol appears on the display and an audible signal alerts that the vehicle needs to stop.
  • 4 Ultrasonic Probes — the sensors operate at a frequency of 40 kHz and are evenly distributed across the width of the rear bumper. The diameter of the sensor is 22 mm, allowing it to be discreetly recessed into the bumper. Each probe has its own cable with a connector for connecting to the control unit.
  • Control Unit — a compact box measuring 90 x 61 x 22 mm has connectors for power supply, monitor, and four sensors labelled A, B, C, and D. It operates in temperatures from -30 °C to 80 °C.
  • Technical Specifications — rated voltage 12 V DC, operating range 10.5–16 V DC, rated current 100–300 mA, detection distance 0.3–2.0 m.
  • Sensor Placement — the probes are installed at a height of 50–70 cm above the ground. The recommended distance between the outer and middle sensors is 30 cm, between the two middle sensors 40 cm, and from the edge of the bumper 12–20 cm.
  • Installation — holes in the bumper are drilled using the included hole saw with a diameter of 22 mm. The display is attached with double-sided adhesive tape to the dashboard or another visible location, sensors are connected to the control unit, and the unit is powered via the included power cable.
  • Package Contents — 1x control unit, 1x LED display with buzzer, 4x parking sensor, 1x hole saw, 1x power cable, 2x double-sided adhesive tape, 1x user manual.

The parking sensors with 4 probes are suitable for passenger cars that do not have a factory-installed parking assistant. The LED display with coloured backlighting and sound alert shows the distance from an obstacle while reversing. Thanks to the included 22 mm hole saw, you have everything needed for installation in one package. The set is intended for vehicles with a board voltage of 12 V. Before drilling, carefully measure the position of all four sensors on the bumper according to the diagram.

Price incl. VAT €49.30