LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Hobbies & Garden Measuring Instruments Cable Detectors 5-in-1 Wall Detector 15 x 7 x 4 cm with Backlit LCD Display and Sound Signal for Finding Beams, Metal and Wires
5-in-1 Wall Detector 15 x 7 x 4 cm with Backlit LCD Display and Sound Signal for Finding Beams, Metal and Wires

5-in-1 Wall Detector 15 x 7 x 4 cm with Backlit LCD Display and Sound Signal for Finding Beams, Metal and Wires

Detects the centre and edges of beams up to a depth of 38 mm, metal up to 60 mm and live wires up to 51 mm. The backlit display clearly shows the results even in low light. Full description
In stock
Colour:
€56.72
Safe shopping Safe shopping
Overview
5-in-1 Wall Detector 15 x 7 x 4 cm with Backlit LCD Display and Sound Signal for Finding Beams, Metal and Wires

The handheld 5-in-1 wall detector helps to identify what lies beneath the surface of walls, ceilings or floors before drilling or hammering in nails. In three modes for beam detection, it locates the edges and centre of wooden or metal profiles at a depth of up to 38 mm. The metal mode reveals pipes, reinforcement and other metal objects, while the separate AC mode alerts to live wires at a depth of 51 mm. The detector is suitable for drywall partitions and walls covered with wooden panels, where you need to securely hang a shelf, picture or television. Thanks to its compact shape, it can be comfortably held in one hand and easily stored in a tool bag.

The measurement results are displayed on a backlit LCD display, where you can see the selected mode, signal strength and arrows indicating the direction to the beam. Once the device finds the desired object, an audible signal sounds, so you do not need to constantly watch the display. All modes feature automatic calibration and monitor the presence of alternating voltage in the wall during each scan. The display also shows the battery status, so you can tell in advance when it needs replacing. The shaped side surfaces with a non-slip finish improve grip when sliding the device along the wall.

  • Type – handheld 5-in-1 wall detector
  • Modes – three modes for beam detection, metal detection and live wire detection
  • Beam detection depth – 13 mm, 25 mm or 38 mm depending on the selected mode
  • Metal detection depth – up to 60 mm
  • Live wire detection depth – up to 51 mm
  • Display – backlit LCD with mode indicator, signal strength and battery status
  • Signalisation – audible and graphical on the display
  • Calibration – automatic in all modes
  • Power supply – 9 V battery type 6F22, not included
  • Operating temperature – 0 to 40 °C
  • Dimensions – 15 x 7 x 4 cm
  • Contents – 5-in-1 wall detector in a box

Before measuring, select the mode according to the expected wall thickness. If you do not know the depth, start with the smallest range of 13 mm and only switch to 25 mm or 38 mm if the beam is not found. Place the device flat against the wall, turn it on and slowly slide it sideways until the display shows the centre. Mark the found spot with a pencil and repeat the measurement from the opposite side for confirmation. Keep the detector dry and remove the battery if not used for an extended period.

The 5-in-1 wall detector is a practical helper for DIY enthusiasts, electricians, and anyone who drills, assembles furniture or hangs pictures at home. It combines the search for beams, metal and live wires in one device measuring 15 x 7 x 4 cm. The operation using two buttons is straightforward without lengthy training. It is powered by a 9 V battery type 6F22, which needs to be purchased separately. With the detector at hand, you will know where cables, pipes and load-bearing profiles run while drilling.

Price incl. VAT €56.72