LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Home & Household Supplies Plumbing Circulation and booster pumps Water Pressure Booster Pump 480 W with a Lift of 35 m and a Flow Rate of 3.2 m³ per Hour with Digital Display and Non-Return Valve in Black
Water Pressure Booster Pump 480 W with a Lift of 35 m and a Flow Rate of 3.2 m³ per Hour with Digital Display and Non-Return Valve in Black

Water Pressure Booster Pump 480 W with a Lift of 35 m and a Flow Rate of 3.2 m³ per Hour with Digital Display and Non-Return Valve in Black

The microcomputer monitors the operation of the pump and displays any faults on the screen. The suction height reaches 8 m and the connections have a diameter of 32 mm at a voltage of 220 V. Full description
In stock
€253.23
Safe shopping Safe shopping
Overview
Water Pressure Booster Pump 480 W with a Lift of 35 m and a Flow Rate of 3.2 m³ per Hour with Digital Display and Non-Return Valve in Black

This pump boosts water pressure in the distribution system and is controlled by a microcomputer with a digital display. Flow rate of 3.2 m³ per hour corresponds to 3200 litres of water, and lift of 35 m indicates the maximum delivery height. The suction height is 8 m, the connections have a diameter of 32 mm, and the power consumption of 480 W operates at a voltage of 220 V. The panel on the side of the motor combines the display, buttons, and indicators. Included is a non-return valve and protections against low water levels, overheating, freezing, and corrosion.

  • Power consumption 480 W — the pump operates at a voltage of 220 V.
  • Flow rate of 3.2 m³ per hour — equivalent to 3200 litres of water per hour.
  • Lift of 35 m — maximum delivery height according to model specifications.
  • Suction height of 8 m — the suction height specified for this pump.
  • Connection diameter of 32 mm — the suction and discharge ports have the same diameter.
  • Microcomputer control — the operation of the pump is managed by a microcomputer unit.
  • No manual adjustment required — the model is described as a design that does not require adjustment.
  • Digital display — values are displayed directly on the pump panel.
  • Fault reporting — the display shows not only operational data but also faults.
  • Non-return valve — the valve is part of the pump.
  • Protection against low water levels — one of the functions monitors for low water levels.
  • Overheating protection — another of the listed functions is protection against overheating.
  • Freezing protection — this is a design marked as antifreeze.
  • Corrosion protection — the manufacturer states protection against corrosion for this model.
  • Start-up at low flow — the pump starts even at low water flow.
  • Control panel on the side — buttons and indicators complement the display.
  • Screwed ports — the suction and discharge parts are attached to the body with screws.
  • Front cover — a round cover with screws closes the front of the body.
  • Ribbing on the motor — the motor cover has ribs around its perimeter.
  • Power cable — the cable exits from the top of the cover.
  • Feet for mounting — the pump stands on feet with holes.
  • Black finish — the body, motor, and panel are all black.

Contents of the package:

  • 1x water pressure booster pump

The pump is suitable for installations where water flows weakly and pressure needs to be increased. Suction height of 8 m along with a lift of 35 m defines from what depth and to what height the pump will transport water. The non-return valve is built directly into the pump, complemented by protections against low water levels, overheating, freezing, and corrosion. The power consumption of 480 W and voltage of 220 V correspond to the specifications, with a flow rate of 3.2 m³ per hour. Control is focused on the panel with the display, allowing the pump's status to be visible from the side without further intervention.

Price incl. VAT €253.23