LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Home & Household Supplies Plumbing Circulation and booster pumps Hot Water Circulation Pump with 3 Speeds, Flow Rate of 30 l per Minute, Power Consumption of 100 W and 3/4 Inch Connection in Green and Black Design
Hot Water Circulation Pump with 3 Speeds, Flow Rate of 30 l per Minute, Power Consumption of 100 W and 3/4 Inch Connection in Green and Black Design

Hot Water Circulation Pump with 3 Speeds, Flow Rate of 30 l per Minute, Power Consumption of 100 W and 3/4 Inch Connection in Green and Black Design

The three-position switch on the red knob selects the power as needed. The maximum head reaches 6 m, and the 3/4 inch fittings and seals are included in the package. Full description
In stock
€81.18
Safe shopping Safe shopping
Overview
Hot Water Circulation Pump with 3 Speeds, Flow Rate of 30 l per Minute, Power Consumption of 100 W and 3/4 Inch Connection in Green and Black Design

The circulation pump is designed for distributing hot water in a circuit and is installed in the piping via 3/4 inch fittings. The maximum flow rate is 30 l per minute and the maximum head reaches 6 m. Power consumption of 100 W is stated as the maximum value in the specification. The power is switched using a red knob with three positions marked 1, 2, and 3. The pump body is green, the terminal box with the cable is black, and brass fittings from the package are used for the connection.

  • Maximum flow rate 30 l per minute — value according to the product specification.
  • Maximum head — the pump can achieve a head of up to 6 m.
  • Power consumption 100 W — this is the maximum power consumption value.
  • Three power levels — the red knob has positions 1, 2, and 3.
  • Position markings — the numbers 1, 2, and 3 are marked directly below the switch.
  • 3/4 inch connection — both input and output have a 3/4 inch thread.
  • Brass fittings — the package includes two fittings and two coupling nuts.
  • Sealing rings — two rubber rings for joints are also included in the package.
  • Green and black design — the pump body is green, and the cover with the terminal box is black.
  • Power cable — the cable exits from the side of the cover and is terminated with a plug.
  • Screwed cover — the electrical installation cover is secured with a screw on the top side.
  • Noise level according to the manufacturer — the manufacturer's documentation states a value of 20 dB.
  • External control — the switch is located on the front side of the cover and is accessible even after installation.
  • Installation in piping — the pump is installed between two sections of piping via fittings.
  • Compact body — the round body of the pump connects to the square cover with the electrical installation.
  • Side outlet — the discharge spout leads from the right side of the body.

Package contents:

  • 1x hot water circulation pump
  • 2x brass fittings
  • 2x coupling nuts
  • 2x sealing rings

The pump is suitable for circuits with hot water where it is necessary to keep the water in motion, such as in the distribution of hot domestic water. The 3/4 inch connection corresponds to standard distributions, and the package includes brass fittings and sealing rings. Three power levels allow for selecting lower or higher speeds depending on the length of the circuit. The maximum flow rate of 30 l per minute and head of 6 m are values stated by the manufacturer as maximum; actual values depend on the specific circuit. The green body with a black cover has a switch on the front side, allowing adjustments without disassembling the connection.

Price incl. VAT €81.18