LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Hobbies & Garden Measuring Instruments Protractors Digital Inclinometer and Spirit Level with Double Laser and Stand with an Accuracy of 0.2° Range of 4 x 90° and USB-C Charging in Silver
Digital Inclinometer and Spirit Level with Double Laser and Stand with an Accuracy of 0.2° Range of 4 x 90° and USB-C Charging in Silver

Digital Inclinometer and Spirit Level with Double Laser and Stand with an Accuracy of 0.2° Range of 4 x 90° and USB-C Charging in Silver

The beam projects from both ends of the body, and the stand holds the device tilted without needing to be held. The display shows the angle with a sign, and charging requires just a USB-C cable. Full description
In stock
€70.26
Safe shopping Safe shopping
Overview
Digital Inclinometer and Spirit Level with Double Laser and Stand with an Accuracy of 0.2° Range of 4 x 90° and USB-C Charging in Silver

The measuring device projects a laser beam from both ends of the body, allowing the marked line to continue on both sides and intersect the entire room in one plane without moving the tool. The angle is read on the display in degrees with one decimal place and is shown positively or negatively depending on the direction in which the body is tilted. The stated measurement accuracy is ±0.2° on one axis and the range covers 4 x 90°, so the device can be placed or set up in any position while the value remains readable. Included is a stand with a circular base and a tilting joint, on which the body can be fixed at the chosen angle, standing without being held and freeing both hands for work. The built-in battery is charged via a USB-C connector, so the tool does not require battery replacements and can be recharged with a phone cable.

  • Two laser beams – the line projects from both faces of the device, allowing one position of the tool to mark the line simultaneously to the left and right without needing to move it from one wall to another.
  • Stand with a circular base – the low base holds the device on a table, windowsill, or floor and distributes its weight so that it does not tip over when the cable is touched or when hands brush against it.
  • Tilting joint with a screw – the body tilts on the stand to the required angle and is tightened with a knurled screw, ensuring the line remains in the same position throughout the work.
  • Deviation ±0.2° – the stated tolerance corresponds to installation work, measuring partitions, and adjusting machines, where work is done in tenths of a degree.
  • Measuring range 4 x 90° – the device operates in all four quadrants, so it can be used horizontally, vertically, sideways, and at an angle exceeding the vertical.
  • Display with large digits – the value is readable from a distance and from the side, which is useful when the device is standing on a stand further away from the operator or lower down by the floor.
  • Display of positive and negative values – the sign indicates which direction the surface slopes, allowing the angle to be evaluated without needing to think about the orientation of the tool.
  • Charging via USB-C connector – charging requires just a standard cable and power bank, making it possible to work with the device on a construction site without a nearby socket.

Contents of the package:

  • 1x digital inclinometer
  • 1x stand

The assembly is useful for furniture and tiling installation, measuring partitions, checking floor slopes, and adjusting workshop machines. Before working, it is advisable to place the stand on a flat surface, level the zero, and only then tilt the body to the measured angle. The laser line is sharpest on a matte background, while on a glossy surface or glass, the beam disperses and the line loses contrast. The beam must not point into eyes, so it is best to orient the stand so that the line ends on the wall and does not cross a path where someone may walk. After finishing work, the device should be wiped, recharged, and stored with the stand so that nothing presses against the laser window.

Price incl. VAT €70.26