LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Hobbies & Garden Pumps Dirty water and drainage pumps Submersible Wastewater Pump 1300 W with a Lift of 11 m and Float Switch, Dimensions 40 x 18 x 18 cm in Silver-Black Finish
Submersible Wastewater Pump 1300 W with a Lift of 11 m and Float Switch, Dimensions 40 x 18 x 18 cm in Silver-Black Finish

Submersible Wastewater Pump 1300 W with a Lift of 11 m and Float Switch, Dimensions 40 x 18 x 18 cm in Silver-Black Finish

The stainless steel casing covers the motor and pump section, and the pump stands on feet at the bottom. The current consumption of 4.9 A at 230 V corresponds to a power input of 1300 W and a lift of up to 11 m. Full description
In stock
€168.95
Safe shopping Safe shopping
Overview
Submersible Wastewater Pump 1300 W with a Lift of 11 m and Float Switch, Dimensions 40 x 18 x 18 cm in Silver-Black Finish

The submersible pump can handle wastewater in a sump, pit, or flooded basement after an accident. Power input of 1300 W corresponds to 1.75 HP, powered by 230 V at 50 Hz with a current consumption of 4.9 A. Lift of up to 11 m indicates the maximum head height. The flow rate reaches 333.3 l per minute, which is approximately 20,000 litres of water per hour. The casing of the motor and pump section is stainless steel, and the discharge is directed sideways through a threaded elbow.

  • Lift of up to 11 m — maximum head height according to specifications.
  • Flow rate — the pump can handle up to 333.3 l per minute, which is 20,000 litres per hour.
  • Power input of 1300 W — equivalent to 1.75 HP.
  • Power supply 230 V — mains 50 Hz and current consumption of 4.9 A.
  • Float switch — the blue float on the cable monitors the water level.
  • Full stainless steel casing — both the upper and lower parts of the body are stainless steel.
  • Side discharge outlet — elbow with a nut directs the hose sideways.
  • Threaded outlet — the outlet is finished with an external thread.
  • Handle on top — the black handle across the top is for carrying.
  • Feet at the bottom — the pump stands on stainless steel feet.
  • Bottom suction — water flows into the pump between the feet at the bottom.
  • Dimensions 40 x 18 x 18 cm — the height of the body is 40 cm and the diameter is 18 cm.
  • Water temperature 0 to 35 °C — the range of temperatures in which the pump operates.
  • Power cable — the cable is led out from the top under the handle.
  • Submerged operation — the pump is designed to work underwater.
  • Maximum specifications — lift and flow are given as maximum values.
  • Silver-black finish — shiny stainless steel is complemented by black plastic parts.
  • Label on the casing — the body has a label with power, flow, and lift specifications.
  • Water drainage — suitable for emptying a sump, basement, or tank before maintenance.
  • Higher lift — 11 m allows for pumping water from a deeper pit upwards.

Contents of the package:

  • 1x submersible wastewater pump

The pump is designed for draining wastewater from places where water accumulates during flooding or where it collects. Dimensions 40 x 18 x 18 cm correspond to a slim body that can pass through narrower pits. The float switch reacts to the water level and determines when the motor runs and when it stops. Power input of 1300 W and current consumption of 4.9 A at 230 V complements the flow rate of 333.3 l per minute. The stainless steel casing with a handle and feet at the bottom facilitates lowering, pulling out, and positioning at the bottom of the sump.

Price incl. VAT €168.95