LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Hobbies & Garden Pumps Dirty water and drainage pumps Submersible Waste Water Pump 1100 W with a Head of 9 m and a Flow Rate of 333.3 l per Minute with Float Switch in Silver-Black Finish
Submersible Waste Water Pump 1100 W with a Head of 9 m and a Flow Rate of 333.3 l per Minute with Float Switch in Silver-Black Finish

Submersible Waste Water Pump 1100 W with a Head of 9 m and a Flow Rate of 333.3 l per Minute with Float Switch in Silver-Black Finish

Pumps up to 20,000 litres of water per hour with a head of up to 9 m. The side discharge outlet with elbow makes hose connection easier even at the wall of the pit or shaft. Full description
In stock
€117.86
Safe shopping Safe shopping
Overview
Submersible Waste Water Pump 1100 W with a Head of 9 m and a Flow Rate of 333.3 l per Minute with Float Switch in Silver-Black Finish

The submersible pump drains waste water from flooded areas, pits, and tanks after flooding or during maintenance. Power Consumption 1100 W corresponds to a performance of 1.5 HP and is powered by a 230 V supply with a frequency of 50 Hz. Flow Rate of up to 333.3 l per Minute means approximately 20,000 litres of water per hour. The discharge outlet is directed sideways through an elbow and ends with a stepped nozzle. The water level is monitored by a float switch on a separate cable.

  • Power Consumption 1100 W — equivalent to 1.5 HP.
  • Performance 1.5 HP — this value corresponds to a power consumption of 1100 W.
  • Flow Rate of up to 333.3 l per Minute — approximately 20,000 litres of water per hour.
  • Head — maximum delivery height is 9 m.
  • Power Supply 230 V — frequency 50 Hz and current consumption of 2.7 A.
  • Float Switch — the switch in a blue housing hangs on its own cable.
  • Side Discharge — the elbow directs the hose away from the pump body, so the hose does not obstruct above the pump.
  • Stepped Nozzle — the end is tightened with a union nut.
  • Stainless Steel Housing — the upper part with the motor is made of stainless steel.
  • Black Pumping Part — the lower part of the body is made of black plastic.
  • Handle on Top — the handle across the entire top side is used for carrying and lowering.
  • Bottom Suction — water is drawn in from the bottom of the pump under the body.
  • Feet on the Bottom — the pump stands on protrusions at the bottom.
  • Dimensions 33.6 x 15.9 x 19.3 cm — total height is 33.6 cm.
  • Water Temperature 0 to 35 °C — the range of temperatures for the pumped water.
  • Power Cable — the cable exits from the top of the housing.
  • Operation Underwater — the pump operates submerged.
  • Maximum Values — both flow rate and head are given as maximum.
  • Silver-Black Finish — shiny stainless steel housing and black plastic parts.
  • Data Label — there is a label on the housing with power, flow rate, and head information.
  • Draining Flooded Areas — suitable for cellars, pits, and for emptying tanks.

Contents of the package:

  • 1x submersible waste water pump

The pump is suitable for any situation where there is a need to remove large amounts of waste water, such as from a cellar or pit. Float Switch moves with the water level and determines when the pump runs. Water Temperature 0 to 35 °C defines what water can be pumped. A flow rate of 333.3 l per minute and a head of 9 m correspond to approximately 20,000 litres of water per hour delivered to a height of nine metres. Dimensions of 33.6 x 15.9 x 19.3 cm and the handle on the top make lowering and lifting from the shaft easier.

Price incl. VAT €117.86