LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Hobbies & Garden Pumps Dirty water and drainage pumps Submersible Drainage Pump 12 V with a Flow Rate of 70 l per Minute and a Head of 5 m with a 25 mm Outlet in Orange and Black Design for Water Removal
Submersible Drainage Pump 12 V with a Flow Rate of 70 l per Minute and a Head of 5 m with a 25 mm Outlet in Orange and Black Design for Water Removal

Submersible Drainage Pump 12 V with a Flow Rate of 70 l per Minute and a Head of 5 m with a 25 mm Outlet in Orange and Black Design for Water Removal

Pumps 4.2 m³ of water per hour, which is 70 litres per minute. The 25 mm outlet is complemented by an included elbow, clamp, and a 1.5 m cable with two wires. Full description
In stock
€68.52
Safe shopping Safe shopping
Overview
Submersible Drainage Pump 12 V with a Flow Rate of 70 l per Minute and a Head of 5 m with a 25 mm Outlet in Orange and Black Design for Water Removal

The 12 V DC submersible pump removes water from tanks, pits, and flooded areas without being connected to the mains. A flow rate of 70 l per minute corresponds to 4.2 m³ of water per hour. A head of up to 5 m indicates how high the pump can transport water. The outlet has a diameter of 25 mm, which is one inch, and the package includes an elbow with a hose clamp. The power cable measures 1.5 m and is terminated with two wires marked for polarity.

  • Flow rate of 70 l per minute — equivalent to 4.2 m³ of water per hour.
  • Head of up to 5 m — maximum delivery height as specified.
  • Powered by 12 V — the pump operates on direct current.
  • Power of 0.07 HP — the power rating specified for this model.
  • Outlet — the outlet has a diameter of 25 mm, which is one inch.
  • Elbow included — the included elbow directs the discharge in the desired direction.
  • Hose clamp — a metal clamp secures the hose to the outlet.
  • 1.5 m cable — the supply cable is 1.5 m long.
  • Two wires — the ends of the cable are marked according to polarity.
  • Polarity marking — the cable has a label with the positive wire.
  • Top chain — the ball chain is used for hanging or lifting the pump from the bottom.
  • Suction slots — the lower part has slots around the perimeter for drawing in water.
  • Orange motor cover — the upper part of the pump is orange.
  • Black pumping section — the lower part with the outlet is black.
  • Compact body — the pump fits into smaller tanks, barrels, or pits.
  • Operation underwater — the pump operates submerged in water.
  • Side discharge — the outlet pipe leads from the side of the pumping section.
  • Label on the cover — there is a label with parameters on the top side.
  • Low voltage — operation at 12 V does not require a mains socket.
  • Water removal — suitable for draining tanks, barrels, or flooded areas with water.
  • Maximum values — both flow rate and head are stated as maximum.

Contents of the package:

  • 1x submersible pump
  • 1x discharge elbow
  • 1x hose clamp

The pump is suitable for any situation where a DC power source is available and water needs to be removed without connecting to a 230 V mains supply. Powered by 12 V means that the pump connects to a DC source rather than a socket. The 1.5 m cable provides space for connection above the water level. A flow rate of 70 l per minute and a head of 5 m correspond to 4.2 m³ of water per hour. The elbow and hose clamp included in the package facilitate the connection of a hose to the 25 mm outlet.

Price incl. VAT €68.52