LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Hobbies & Garden Pumps Diaphragm and spray pumps Self-Priming Membrane Pump for Motorhomes and Boats 12 V with 40 PSI Pressure and 3.8 L per Minute Flow in Black-Orange Design
Self-Priming Membrane Pump for Motorhomes and Boats 12 V with 40 PSI Pressure and 3.8 L per Minute Flow in Black-Orange Design

Self-Priming Membrane Pump for Motorhomes and Boats 12 V with 40 PSI Pressure and 3.8 L per Minute Flow in Black-Orange Design

The pressure switch turns off the pump when reaching 40 to 45 PSI. Suction works up to a height of 1.8 m and the ports have an internal diameter of 10.5 mm for a 3/8 inch hose. Full description
In stock
€97.77
Safe shopping Safe shopping
Overview
Self-Priming Membrane Pump for Motorhomes and Boats 12 V with 40 PSI Pressure and 3.8 L per Minute Flow in Black-Orange Design

The self-priming membrane pump delivers water under pressure in motorhomes, boats, and small distributions. A pressure of 40 PSI corresponds to 2.8 bar, and the pressure switch turns off the pump at this value. A flow rate of 3.8 L per minute applies with a tolerance of 10 percent. Power is provided by a direct current voltage of 12 V, and the consumption is around 2 A. The motor is a direct current type with a permanent magnet, and the ports have a diameter of 3/8 inch.

  • Pressure 40 PSI — converted to 2.8 bar, the cut-off pressure is specified in the range of 40 to 45 PSI.
  • Adjustable Pressure — the pressure value can be adjusted on the pump.
  • Flow Rate 3.8 L per Minute — with a tolerance of ±10 percent.
  • Power Supply 12 V — direct current voltage, current 2 A and maximum 4 A.
  • Self-Priming — suction height is 1.8 m.
  • Ports 3/8 Inch — the internal diameter of the connections is 10.5 mm.
  • Pressure Switch — the switch is fully automatic.
  • Membrane Construction — the pump is of membrane type.
  • Motor with Permanent Magnet — the drive is provided by a direct current motor.
  • Noise Level Up to 70 dB — operating noise is specified up to 70 dB.
  • Media Temperature — the pump is designed for liquids from 5 to 60 °C.
  • Ambient Temperature — operating environment is specified in the range of 5 to 40 °C.
  • Suitable Liquids — water and weakly acidic or alkaline liquids with pH 4 to 10 without hard particles.
  • Flow Rate According to Pressure — at zero pressure 3.84 L per minute, at 1.4 bar 3 L per minute.
  • Consumption According to Pressure — from 1.85 A at zero pressure to 3.16 A at 2.8 bar.
  • Dimensions 154 x 79 mm — the base has a width of 98 mm and the height of the pump is 73.5 mm.
  • Hole Spacing 55 mm — mounting holes have a diameter of 5 mm.
  • Mounting Feet — four feet are provided for screwing the pump.
  • Supply Wires — a pair of colour-coded wires comes from the motor.
  • Power Supply via Transformer — the pump must not be connected to 220 V without a transformer.
  • Warning on Label — the pump is not designed for flammable liquids.
  • Black-Orange Design — the motor is black, the pumping head is orange.

Contents of the Package:

  • 1x self-priming membrane pump

The pump is suitable for water distributions in motorhomes, caravans, and boats. Ports 3/8 inch with an internal diameter of 10.5 mm correspond to a standard hose of this size. Media temperature of 5 to 60 °C can be water or weakly acidic or alkaline liquid with pH 4 to 10. A suction height of 1.8 m means that the pump can draw water from a lower tank. Dimensions of 154 x 79 mm and hole spacing of 55 mm determine how much space the pump will occupy.

Price incl. VAT €97.77