LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Home & Household Supplies Plumbing Circulation and booster pumps Fully Automatic Water Pressure Boosting Pump 320 W with a Flow Rate of 3 m³ per Hour and a Head of 30 m with a 32 mm Connection in Black
Fully Automatic Water Pressure Boosting Pump 320 W with a Flow Rate of 3 m³ per Hour and a Head of 30 m with a 32 mm Connection in Black

Fully Automatic Water Pressure Boosting Pump 320 W with a Flow Rate of 3 m³ per Hour and a Head of 30 m with a 32 mm Connection in Black

The pump has the pressure vessel and control unit directly on the body. The head reaches 30 m and the suction height is 8 m with a flow rate of 3 m³ per hour and a power consumption of 320 W. Full description
In stock
€226.16
Safe shopping Safe shopping
Overview
Fully Automatic Water Pressure Boosting Pump 320 W with a Flow Rate of 3 m³ per Hour and a Head of 30 m with a 32 mm Connection in Black

The pump is designed to increase water pressure in domestic plumbing and operates in fully automatic mode. Power consumption 320 W corresponds to a supply voltage of 220 V. Flow rate 3 m³ per hour and head of 30 m are the values specified in the pump parameters. The suction height reaches 8 m and the connections have a diameter of 32 mm. On the top side, there is a pressure vessel and a cover with automation, and the entire pump stands on a metal base.

  • Fully automatic operation — the pump is supplied in fully automatic design, so it does not need to be started manually.
  • Power consumption 320 W — the power consumption value according to the product parameters.
  • Supply voltage 220 V — the pump connects to a 220 V network.
  • Flow rate 3 m³ per hour — the flow rate for this model, which is 3000 litres per hour.
  • Head — the pump can achieve a head of up to 30 m, which is the maximum delivery height.
  • Suction height 8 m — the suction height value according to the parameters.
  • Connections 32 mm — both the suction and discharge ports have a diameter of 32 mm according to the connection size data.
  • Pressure vessel — the vessel is located at the top above the pump body and consists of a black cylindrical container.
  • Cover with automation — at the top, there is a cover with a control section and a brass end piece.
  • Metal base — the plate under the pump has holes for fastening, so the pump stays on the base.
  • Black design — the body, motor, and vessel are in black colour.
  • Label with parameters — there is a label with technical data on the motor cover.
  • Ports on the body — the suction and discharge ports emerge from the pumping section on the front side.
  • Motor cover — the cylindrical cover forms the rear part of the pump.
  • Connection to plumbing — the suction port connects to the inlet and the discharge to the plumbing.
  • Compact assembly — the motor, pumping section, vessel, and automation form a single unit.

Contents of the package:

  • 1x fully automatic water pressure boosting pump

The pump is suitable where the water pressure in the plumbing is low and needs to be increased to a normal level. Suction height 8 m and head 30 m determine from where and to where the pump will transport the water. Connections with a diameter of 32 mm connect to both the suction and discharge side of the pipe. A flow rate of 3 m³ per hour corresponds to 3000 litres of water per hour with a power consumption of 320 W. The black design with the pressure vessel on top and the metal base below forms a single unit that can be installed into the plumbing.

Price incl. VAT €226.16