LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Auto & Moto Car Spare Parts Exhaust Coupling 51 mm to 51 mm Reducer Exhaust Pipe Adapter Stainless Steel with 2 Clamps Weld-Free Installation Universal Connector
Exhaust Coupling 51 mm to 51 mm Reducer Exhaust Pipe Adapter Stainless Steel with 2 Clamps Weld-Free Installation Universal Connector

Exhaust Coupling 51 mm to 51 mm Reducer Exhaust Pipe Adapter Stainless Steel with 2 Clamps Weld-Free Installation Universal Connector

Stainless steel exhaust pipe coupling 51 mm to 51 mm with two tightening clamps. Connect two pipes of the same diameter without welding, height 105 mm. Full description
In stock
€37.51
Safe shopping Safe shopping
Overview
Exhaust Coupling 51 mm to 51 mm Reducer Exhaust Pipe Adapter Stainless Steel with 2 Clamps Weld-Free Installation Universal Connector

The exhaust coupling is a universal connecting adapter that links two exhaust pipes of the same diameter. It has an internal diameter of 51 mm at both ends, allowing you to easily connect two pipes of this size. The adapter is made of polished stainless steel, and its parts are joined by circumferential welding. Both ends feature tightening clamps with screws, enabling installation without welding. The coupling is suitable for modifications to the exhaust system, replacing a silencer, or repairing damaged piping.

  • Dimensions — The internal diameter of both ends of the coupling is 51 mm. The overall height of the coupling is 105 mm.
  • Stainless Steel — The body of the coupling is made from polished stainless steel, which resists corrosion and high temperatures of exhaust gases.
  • Same Diameter on Both Sides — Both ends have the same internal diameter of 51 mm, making the coupling suitable for connecting two pipes of the same size.
  • Welded Joint — The parts of the coupling are connected by a circumferential weld that ensures a strong and tight connection.
  • Grooved Ends — Both ends of the coupling are longitudinally slotted. Once the clamp is tightened, the end compresses and firmly grips the exhaust pipe.
  • Tightening Clamps — Each end features a stainless steel tightening clamp with a screw and nut, which ensures a strong and tight connection with the pipe when tightened.
  • Weld-Free Installation — Simply insert the pipes into both ends of the coupling and tighten the clamps. Installation can be done with a standard wrench without welding and without modifying the pipe.
  • Universal Use — The coupling is suitable for exhausts of passenger cars, motorcycles, and other vehicles wherever you need to connect two pipes with a diameter of 51 mm.
  • Silencer Replacement — The coupling facilitates the installation of a new silencer or tailpipe with the same inlet diameter as the existing piping.
  • Pipe Repair — If a section of the exhaust pipe is corroded or damaged, you can cut it out and replace it with a new pipe. The coupling will then securely connect the new part to the rest of the exhaust.
  • Polished Surface — The shiny stainless steel gives a clean impression and is suitable for areas where the exhaust is visible.
  • Before Purchase — Measure the outer diameter of both pipes you wish to connect and ensure it matches the internal diameter of the coupling, which is 51 mm.
  • Installation Warning — Perform the installation only on a cooled exhaust. After the first few kilometres, check the tightness of both clamps.
  • Package Contents — 1x exhaust coupling with 2 tightening clamps

The stainless steel exhaust coupling is a practical solution for connecting two exhaust pipes of the same diameter. The dimension of 51 mm at both ends and a height of 105 mm are suitable for common repairs and modifications of exhaust piping. The grooved ends compress tightly around the pipe once the clamps are tightened. With two tightening clamps, the coupling can be installed weld-free in just a few minutes. It is ideal for silencer replacements, repairs, and exhaust modifications.

Price incl. VAT €37.51