LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Hobbies & Garden Tools Hand Tools Spanners Combined Ratchet Wrench 23 mm with Fine Ratchet and 5° Engagement with a 290 mm Arm Length in Dark Grey Finish for Less Common Nuts
Combined Ratchet Wrench 23 mm with Fine Ratchet and 5° Engagement with a 290 mm Arm Length in Dark Grey Finish for Less Common Nuts

Combined Ratchet Wrench 23 mm with Fine Ratchet and 5° Engagement with a 290 mm Arm Length in Dark Grey Finish for Less Common Nuts

The 23 mm size is often missing from standard sets, and without it, work comes to a halt. The 290 mm arm provides leverage, and the fine ratchet moves the socket after just five degrees of rotation. Full description
In stock
€36.20
Safe shopping Safe shopping
Overview
Combined Ratchet Wrench 23 mm with Fine Ratchet and 5° Engagement with a 290 mm Arm Length in Dark Grey Finish for Less Common Nuts

The twenty-three millimetre size is not one that is found in every set, yet it appears on some axle bearing nuts and hydraulic connections. This piece covers it separately and offers a 290 mm long arm, which allows for the torque needed to loosen a tightly fastened joint. The socket is driven by a 72-tooth ratchet and engages after five degrees of rotation, meaning the wrench remains attached even during short movements and does not need to be repositioned after each pull. The direction of rotation is switched by a small lever on the ring, allowing the nut to be both loosened and tightened with the same attachment. The head has a width of 43 mm and a thickness of 14.5 mm, the open fork measures 45 mm and is 10.5 mm thick, so both sides of the wrench can withstand full hand force. The surface is dark grey with a gold-coloured ratchet ring, and the size 23 is stamped on both sides of the arm.

  • Less Common Size 23 mm — a size that standard sets omit, yet is used on some machines and axles, and work comes to a halt without it.
  • 290 mm Arm — the length corresponds to the load of this size and allows for loosening a joint without improvised extension using a pipe.
  • 72-Tooth Ratchet — short engagement of 5° helps where the arm does not have a full range of motion, for example, between the frame and the tank.
  • Socket Thickness of 14.5 mm — the robust head transmits torque without springing, and the teeth remain firmly engaged even when tightening to the limit.
  • Fork 45 mm — the open end with a thickness of 10.5 mm is suitable for connections accessible solely from the side, such as hydraulic fittings and nuts on pipes.
  • Stamped Number 23 — the marking on both arms helps distinguish the wrench from similar sizes in the drawer, even in dim light.

Contents:

  • 1x Combined Ratchet Wrench 23 mm

The wrench is suitable for vehicle service in agricultural workshops as well as for machine maintenance where less common sizes occur. It is also applicable to construction equipment and older devices whose fasteners do not correspond to today's standard sizes. Before use, it is advisable to verify that it is indeed a twenty-three and not an adjacent size, as a loose socket can damage the edges of the nut. The ratchet is used for smooth tightening and for turning a loosened joint, while a fixed wrench is more suitable for the initial loosening of a rusted nut. The socket is applied perpendicularly and fully onto the nut to distribute the torque across all six edges. This standalone piece in this size complements the existing set precisely with the size that would otherwise require the purchase of an entirely new range. The dark grey surface with the gold ring makes it easy to identify the wrench, and after use, it can be wiped clean of grease with a single cloth. It can be stored freely in a drawer or hung on a panel alongside other sizes.

Price incl. VAT €36.20