LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Tools Hand Tools Spanners 22 mm Ratchet Wrench with 72 Teeth and Open Fork, Total Length 290 mm in Dark Grey Finish for Heavy Machine Joints
22 mm Ratchet Wrench with 72 Teeth and Open Fork, Total Length 290 mm in Dark Grey Finish for Heavy Machine Joints
22 mm Ratchet Wrench with 72 Teeth and Open Fork, Total Length 290 mm in Dark Grey Finish for Heavy Machine Joints 1

22 mm Ratchet Wrench with 72 Teeth and Open Fork, Total Length 290 mm in Dark Grey Finish for Heavy Machine Joints

The 290 mm long wrench provides sufficient leverage for 22 mm nuts. The 72-tooth socket advances by 5° and the robust head, 14 mm thick, can handle higher loads. Full description
In stock
€36.64
Safe shopping Safe shopping
Overview
22 mm Ratchet Wrench with 72 Teeth and Open Fork, Total Length 290 mm in Dark Grey Finish for Heavy Machine Joints

With a size of 22 mm, it is not just about work speed, but mainly about ensuring that the wrench transmits the necessary force without loosening at the head. The arm measures 290 mm and provides leverage, allowing a tightened joint to be loosened without the use of a pipe or strikes. The socket has 72 teeth, so between each engagement, it only needs to be turned five degrees, and the wrench remains on the nut. The width of the socket is 43 mm with a thickness of 14 mm, the open fork measures 45 mm and is 10 mm thick, which corresponds to the load for this size. The wrench has a dark grey surface with a gold-coloured ratchet ring, and the number 22 is embossed on both arms.

  • Size 22 mm — the size used for axle suspensions in hydraulic connections and for load-bearing bolts in trailer frames and carriers.
  • Length 290 mm — the arm adds leverage and saves effort and joints when loosening, especially when there are multiple joints on the machine in succession.
  • 72 Teeth — the 5° engagement allows work even in narrow gaps between parts, where there is no room for full movement.
  • Socket 43 mm with a thickness of 14 mm — the robust head distributes the load and does not flex even under higher torque, ensuring the teeth remain engaged.
  • Fork 45 mm — the open end, 10 mm thick, is used for joints that can only be accessed from the side, typically in fittings.
  • Marking on the Arm — the embossed size on both sides speeds up the selection of the wrench when working on the machine.

Contents:

  • 1x combined ratchet wrench 22 mm

The wrench is suitable for use in commercial and agricultural machinery, in construction equipment, and during the assembly of steel structures. It is also ideal for service vans, where one piece must handle work directly in the field. Before loosening, it is advisable to check whether the socket has fully seated on the nut, as partial engagement can damage the edges. The ratchet is used for tightening and loosening, while the actual release of a rusted joint is better done with the fork end or the head with the ratchet. The 290 mm long arm provides enough torque for standard joints of this size without the need to use an extension pipe. The dark grey surface with embossed size is easy to clean of grease, and the wrench remains clearly marked even after prolonged use.

Price incl. VAT €36.64