LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Hobbies & Garden Laboratory equipment Laboratory supplies and consumables Laboratory Single-Channel Micropipette with Continuous Volume Adjustment 0.1-2.5 µl Plastic and Digital Display White For Working with Microvolumes
Laboratory Single-Channel Micropipette with Continuous Volume Adjustment 0.1-2.5 µl Plastic and Digital Display White For Working with Microvolumes

Laboratory Single-Channel Micropipette with Continuous Volume Adjustment 0.1-2.5 µl Plastic and Digital Display White For Working with Microvolumes

You can measure even tenths of a microlitre, with the range starting from 0.1 µl. You can adjust the volume by turning the knob and release the used tip with the lever without touching it with your hand. Full description
In stock
€47.99
Safe shopping Safe shopping
Overview
Laboratory Single-Channel Micropipette with Continuous Volume Adjustment 0.1-2.5 µl Plastic and Digital Display White For Working with Microvolumes

Working with volumes below three microlitres requires a tool that can handle even minimal amounts of liquid. This single-channel laboratory pipette covers a range of 0.1-2.5 µl and the volume is adjusted continuously, so there is no need for a separate device for each value. The set amount is displayed on the digital screen directly on the body of the pipette, which shortens sample preparation and reduces errors in reading. The pipette is calibrated according to ISO8655, ensuring that the measured volume corresponds to the set value. The white plastic body is complemented by a control button at the top, a shaped finger rest, and a side lever for tip ejection.

  • Volume range 0.1-2.5 µl — the pipette is designed for microvolumes, where measurements are made with tenths of a microlitre and where any deviation will affect the measurement result.
  • Adjustable volume — the value changes continuously throughout the entire range by turning the control button, there is no need to disassemble the device or change the tip.
  • Digital readout — the set amount is shown on the dial in the window on the body of the pipette, the value is readable even during work and when held with one hand.
  • Blow-out function — when dispensing liquid, no residue of the sample remains in the tip, which is useful for expensive or difficult-to-obtain solutions.
  • Tip ejector — the used tip is released by pressing the side lever, so your hand does not come into contact with the tip or the measured liquid.
  • Plastic body — lightweight construction that does not strain the hand even during longer pipetting series, with a grip shaped for comfortable holding in the palm.
  • Calibration according to ISO8655 — the pipette is calibrated for accuracy and correctness of dosing, with an included key and calibration oil for later adjustments.
  • Single channel — simple construction without mode switching, suction and dispensing occur with one tip and one thumb movement.

Contents of the package:

  • 1x laboratory pipette 0.1-2.5 µl
  • 1x pipette tip
  • 1x pipette stand
  • 1x calibration key
  • 1x calibration oil
  • 1x user manual
  • 1x quality control certificate

The range of 0.1-2.5 µl is suitable wherever the smallest volumes are measured and where a deviation of a tenth of a microlitre would affect the entire experiment. The procedure is simple: set the volume, attach the tip, draw up the liquid, and press the button to dispense it. Continuous volume adjustment throughout the entire range means that one pipette can replace several devices with fixed values and simplify laboratory equipment. The package includes a stand for resting between individual steps, as well as calibration oil and a key, so maintenance can be performed without further purchases. The pipette also comes with a user manual and a quality control certificate. The combination of plastic body and blow-out function makes the pipette a practical tool for everyday laboratory operations.

Price incl. VAT €47.99