LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Menu Close
Empty basket
Your basket is currently empty.
Empty basket
0
Choose category
Home page Home page Hobbies & Garden Laboratory equipment Laboratory supplies and consumables Laboratory Bottle Dispenser JOANLAB DA-10ML Range 2–10 ml with Division 0.2 ml White Adapters GL25 GL28 GL32 GL38 and S40 for Liquids
Laboratory Bottle Dispenser JOANLAB DA-10ML Range 2–10 ml with Division 0.2 ml White Adapters GL25 GL28 GL32 GL38 and S40 for Liquids
Laboratory Bottle Dispenser JOANLAB DA-10ML Range 2–10 ml with Division 0.2 ml White Adapters GL25 GL28 GL32 GL38 and S40 for Liquids 1

Laboratory Bottle Dispenser JOANLAB DA-10ML Range 2–10 ml with Division 0.2 ml White Adapters GL25 GL28 GL32 GL38 and S40 for Liquids

Withdraw buffers and solvents directly from the bottle without pouring. The sliding scale holds the selected dose and five threaded adapters fit standard necks. Full description
In stock
€252.79
Safe shopping Safe shopping
Overview
Laboratory Bottle Dispenser JOANLAB DA-10ML Range 2–10 ml with Division 0.2 ml White Adapters GL25 GL28 GL32 GL38 and S40 for Liquids

Where millilitre units are no longer sufficient and a measuring cylinder slows you down, the ten-millilitre version DA-10ML comes into play. The adjustable range 2–10 ml is controlled by a slider on a scale with divisions of 0.2 ml, and the selected value remains until the next adjustment. The device screws onto the neck of the supply bottle, and the liquid is drawn in through a dip tube directly from it. The package includes five reducing adapters, allowing the dispenser to fit necks ranging from 25 to 40 mm in diameter. The light body with the scale remains readable even from the side.

Features:

  • Adjustable volume 2–10 ml — with a single movement of the slider, the dose can be selected, which can then be dispensed repeatedly without changing the setting.
  • Division of 0.2 ml — fine enough for preparing solutions while being clear for quick reading of the scale, where the operator simply checks the position of the slider and continues working.
  • Dip suction tube — reaches the bottom of the bottle, allowing the remaining amount of solution to be used without tilting and pouring leftover liquid.
  • Adapter set — GL25 (32/25 mm), GL28 (32/28 mm), GL32 (45/32 mm), GL38 (45/38 mm) and S40 (45/40 mm).
  • Rotatable body — the dispenser can be rotated on the neck so that the outlet arm points over the prepared container.
  • Single piston operation — lifting draws in the liquid, pressing releases it; the operator does not need to set down the container.
  • Outlet cap — the tip of the outlet tube is closed when the dispenser remains unused for an extended period; the cap hangs on a strap and stays with the device.
  • Contrasting dark controls — the piston and side lever are dark and easily found on the white body.

Contents of the package:

  • 1x Bottle Dispenser JOANLAB DA-10ML
  • 1x Adapter GL25 (32/25 mm)
  • 1x Adapter GL28 (32/28 mm)
  • 1x Adapter GL32 (45/32 mm)
  • 1x Adapter GL38 (45/38 mm)
  • 1x Adapter S40 (45/40 mm)

The ten-millilitre range covers the dispensing of buffers, solvents, and stock solutions into beakers, flasks, and larger test tubes. In serial work, the adjustment is made only once, and the same dose is repeated, maintaining comparable conditions between samples. Pouring from the bottle into a measuring container, which often causes drips on the work surface, is also eliminated. The five supplied adapters allow the dispenser to be moved between bottles of different sizes as needed. The device is suitable for analytical, microbiological, and educational laboratories, where the same volumes are measured repeatedly throughout the day. If several different solutions are being used simultaneously in operation, each dispenser can be left attached to its own bottle and set to its specific volume.

Price incl. VAT €252.79