LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · Contact Us

Home page Home page Auto & Moto Garage Equipment Welding Supplies Welding Magnet FM1-S Arrow Angles 45 and 90 Degrees Load Capacity 25 kg Dimensions 12.1 x 8.3 x 1.8 cm Blue For Welding
Welding Magnet FM1-S Arrow Angles 45 and 90 Degrees Load Capacity 25 kg Dimensions 12.1 x 8.3 x 1.8 cm Blue For Welding

Welding Magnet FM1-S Arrow Angles 45 and 90 Degrees Load Capacity 25 kg Dimensions 12.1 x 8.3 x 1.8 cm Blue For Welding

Holds two parts at a right angle while you weld both seams. The magnet has a finger hole and a hanging option and can handle a load of up to 25 kg, suitable for smaller profiles. Full description
In stock
€33.14
Safe shopping Safe shopping
Overview
Welding Magnet FM1-S Arrow Angles 45 and 90 Degrees Load Capacity 25 kg Dimensions 12.1 x 8.3 x 1.8 cm Blue For Welding

The arrow-shaped welding magnet is designed to hold two parts at the correct angle during welding, so you do not need a third hand or a set of clamps. The maximum holding force is 25 kg, which is sufficient for thin-walled profiles, sheet metal parts, and small frames. The magnet holds parts at angles of 45 and 90 degrees, which are the most common positions encountered when welding structures. The blue body with a galvanised frame features notches around the edge, allowing the profile's edge to rest securely. Holes in the body enable the magnet to be gripped with fingers or hung on a stand or tool panel.

  • Dimensions — the magnet measures 12.1 x 8.3 x 1.8 cm, making it compact enough to fit in the pocket of a work apron or a toolbox.
  • Ferrite Magnet — the magnetic core is made of ferrite, which withstands typical temperatures around the weld better than neodymium magnets.
  • Seating Surfaces — the notches on the edges ensure that the magnet sits on the profile flat, not on the edge, preventing the part from shifting.
  • Work Without Clamps — the magnet frees both hands for the torch and filler material, allowing you to manage the welding alone.
  • Durable Body — the galvanised steel frame protects the magnetic core from impacts when dropped from a workbench.
  • No Power Supply Required — the magnet does not need electricity or batteries, it is ready to use at any time.
  • Wide Application — suitable for welding frames, fences, structures, and for repairing metal parts.
  • Package Contents — 1x welding magnet

Welders, locksmiths, and DIY enthusiasts will find this magnet useful for quickly positioning two parts at a right angle. The holes in the body facilitate gripping and hanging, so you do not have to search for the magnet among the tools on the table. The holding force of 25 kg applies to a clean, flat surface; it will be lower on rusty or warped sheet metal. After use, it is advisable to clean the magnet of slag and metal shavings that may adhere to it. Larger models from the same range are more suitable for thicker profiles and heavier assemblies.

Price incl. VAT €33.14