LUNZO s.r.o. (Czechia) · info@lunzo.ie · +420 603 337 330 · Mon–Sun 8:00–17:00 Irish time · support in English · Contact Us

Home page Home page PC & Laptop Accessories Printers and 3D printing 3D printing accessories Filament storage and drying Filament Dryer with Two Independent Chambers for Spools 1–2 kg Heating up to 75 °C and Energy-Saving Mode Light Grey for 3D Printing from PLA and PETG as well as TPU
Filament Dryer with Two Independent Chambers for Spools 1–2 kg Heating up to 75 °C and Energy-Saving Mode Light Grey for 3D Printing from PLA and PETG as well as TPU

Filament Dryer with Two Independent Chambers for Spools 1–2 kg Heating up to 75 °C and Energy-Saving Mode Light Grey for 3D Printing from PLA and PETG as well as TPU

The left and right chambers operate independently, allowing two different filaments to be dried simultaneously. Each can accommodate spools up to 200 x 150 mm in size. Full description
In stock
Delivery €1.59
30-day return policy
€276.81
Safe shopping Safe shopping
Overview
Filament Dryer with Two Independent Chambers for Spools 1–2 kg Heating up to 75 °C and Energy-Saving Mode Light Grey for 3D Printing from PLA and PETG as well as TPU

Two Independent Chambers allow for the simultaneous drying of two different materials in one filament dryer, each under its own lid and with its own drying process. Heating up to 75 °C dries damp printing filaments to prepare them for use before the next print. The dryer accommodates spools weighing 1–2 kg with a maximum size of 200 x 150 mm and is designed for filament with a diameter of 1.75 mm. Both chambers are controlled from a single panel with a digital display and buttons, located in the centre of the front side. The light grey body is complemented by dark transparent lids secured with locking clips, under which the chambers are marked with the letters L and R.

  • Separate Drying – the left and right chambers operate independently, allowing different types of filament in each, and the drying of one material does not restrict the other. Both chambers can be operated simultaneously, or just one depending on current needs.
  • Heating Temperature – the internal space heats up to 75 °C, which is sufficient for drying common printing materials, and the temperature value is visible directly on the display without the need to open the lid.
  • Capacity – chambers accommodate spools weighing 1–2 kg with a maximum size of 200 x 150 mm, and two spools of the same material in different colours can stand side by side in one chamber.
  • Filament Diameter – the dryer is designed for filament with a diameter of 1.75 mm, which is the most common size for current 3D printers.
  • Energy-Saving Operation – the smart energy-saving mode limits electricity consumption, which is particularly useful during prolonged or frequent drying of multiple spools simultaneously.
  • Lids and Controls – each chamber has its own dark transparent lid that opens upwards and is secured with a lock symbol clip. Below the display is an L/R button for selecting the chamber, arrow buttons for changing values, and a settings button.

Contents of the Package:

  • 1x filament dryer

The dryer is suitable for 3D printing from PLA, PETG, and TPU as well as other commonly used filaments that need to be dried before printing. Thanks to the separate drying, two materials can be prepared at the same time, for example, PLA in the left chamber and TPU in the right, without the need to dry them sequentially. During extended use, the intelligent energy-saving mode is beneficial in keeping electricity consumption lower. Spools are inserted from the top after opening the lid, and through the dark transparent cover, they can be seen even when the chamber is closed, making it easy to check which material is currently inside. Filaments displayed inside the chambers are not included in the package.

Delivery and Returns
Price incl. VAT €276.81